Shipping Currently Available to USA Addresses Only
Welcome to The Supermicro eStore

    Supermicro 1000W 1U Redundant Battery Backup Power Module Power Supply (PWS-1K01B-1R)

    More Views

    Supermicro 1000W 1U Redundant Battery Backup Power Module Power Supply (PWS-1K01B-1R)
    $401.38
    • Buy 10   $386.90/each
    • Buy 100   $372.43/each
    • Buy 1000   $364.80/each

    Availability: In stock

    • Internal Li-ion Battery for Server
    • Increases Overall Data Center Power Efficiency
    • Improves Stability and Ease of Maintenance
    • Supermicro Certified
    OR

    Please Enter SKU# to Check Validation Status

    • System
    • Chassis
    SKU #:
    Check if your server system is validated with this product
    •System: Enter a server part number (e.g. SYS-1027B-MTF)
    SKU #:
    Check if your chassis is validated with this product
    •Chassis: Enter a chassis part number (e.g. CSE-743TQ-865B)
    Description

    Details

    The Supermicro PWS-1K01B-1R is a redundant power supply capable of supplying 1000W output power at high efficiency. Enjoy the simplicity of active power factor correction (PFC) and automatically correct AC input for a full range of voltages. Features a card edge connector for connection with the backplane of compatible Supermicro 1U systems. This power supply is designed to not only provide you reliable power to your Supermicro server but also protects it from over voltage, over current and short circuiting via protective circuitry embedded into the unit. Rest easy knowing your hardware will be up and running with a mean-time between failure (MTBF) of greater than 200,000 hours and an LED indicator to keep you informed on normal/abnormal conditions for your PSU. This power supply is redundant to safe-guard your system from power failure and allows for hot-swap replacement to eliminate system downtime. In addition, this power supply comes equipped with a BBP module to protect from outages in mission-critical server and storage operations. The BBP single module is capable of supplying 500W 90 seconds hold up and redundant mode 2 modules supplying 1000W 90 seconds hold up. All materials contained comply with RoHS requirements and is certified by Supermicro.

    Compatible with the following power supplies:
    • PWS-1K03A-1R
    • PWS-1K23A-1R
    • PWS-1K28P-SQ
    Detailed Specification

    Additional Information

    Total Power Output 800W / 1000W
    Type Redundant
    Type of Power Supply Battery Back Up Power Supply (BBP)
    Form Factor 1U
    Dimension (W x H x L) 76 x 40 x 336 mm
    +5V N/A
    +12V 100-127Vac: 66.7A & 200-240Vac:83A
    +3.3V N/A
    5V Standby 4A
    Input Voltage Range 100-127Vac & 200-240Vac
    Input Frequency Range 50-60Hz
    Input Current Range 100-127Vac:10A & 200-240Vac: 7A
    Output Type Gold Finger (19 Pair Connector)
    8Pin / 4Pin (12V) Connector N/A
    PFC No
    PMBus Yes
    Energy Efficiency Typical 94%+ @ 230Vac
    80 Plus Certification 80 Plus Platinum
    Warranty 1 year warranty
    Product Environmental Compliance RoHS and REACH compliant, details available upon request
    Resources
    TitleFormatDate
    PWS-1K01B-1R Spec Sheet May 2016
    Prop 65 Warning
    This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov