Shipping Currently Available to USA Addresses Only
Quantity is Limited

    Supermicro 850/1010W 1U -48V DC Power Supply (PWS-1K11P-1R)

    More Views

    Supermicro 850/1010W 1U -48V DC Power Supply (PWS-1K11P-1R)
    $291.40

    Availability: In stock

    • PMBus Support for Remote Management
    • Optimized for 1U Server
    • DC-48V Input Support
    • Supermicro Certified
      OR

      Please Enter SKU# to Check Validation Status

      • System
      • Chassis
      SKU #:
      Check if your server system is validated with this product
      •System: Enter a server part number (e.g. SYS-1027B-MTF)
      SKU #:
      Check if your chassis is validated with this product
      •Chassis: Enter a chassis part number (e.g. CSE-743TQ-865B)
      Description

      Details

      The Supermicro PWS-1K11P-1R is capable of supplying 850W low-line and 1010W high-line output power at 90% efficiency. Enjoy the simplicity of active power factor correction (PFC) and automatically correct DC input for a full range of voltages. Features a card edge connector for connection with the backplane of compatible Supermicro 1U systems. This power supply is designed to not only provide you reliable power to your Supermicro server but also protects it from over voltage, over current and short circuiting via protective circuitry embedded into the unit. Rest easy knowing your hardware will be up and running with a mean-time between failure (MTBF) of greater than 100,000 hours and an LED indicator to keep you informed on normal/abnormal conditions for your PSU. This power supply is redundant to safe-guard your system from power failure and allows for hot-swap replacement to eliminate system downtime. All materials contained comply with RoHS requirements and is certified by Supermicro.

      The PWS-1K11P-1R is compatible with the following power supplies:
      • PWS-1K03A-1R
      • PWS-1K23A-1R
      • PWS-1K28P-SQ
      • PWS-920P-SQ
      • PWS-501P-1R
      • PWS-741P-1R
      • plus more...
      Detailed Specification

      Additional Information

      Total Power Output 850W / 1010W
      Type Module
      Type of Power Supply -48Vdc Power Supply
      Form Factor 1U
      Dimension (W x H x L) 76 x 40 x 346mm
      +5V N/A
      +12V 70/83A
      +3.3V N/A
      5V Standby 4A
      Input Voltage Range 850W Input: -36 to -42Vdc; 1010W Input: -43 to -76Vdc
      Input Frequency Range N/A
      Input Current Range 850W Input: 30-25A; 1010W Input: 30-17A
      Output Type Gold Finger (19 Pair Connector)
      8Pin / 4Pin (12V) Connector N/A
      PFC No
      PMBus Yes
      Energy Efficiency 90% Typical
      80 Plus Certification N/A
      Warranty 1 year warranty
      Product Environmental Compliance RoHS and REACH compliant, details available upon request
      Resources
      TitleFormatDate
      PWS-1K11P-1R Spec Sheet September 2017
      Prop 65 Warning
      This product can expose you to chemicals including lead, known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.p65Warnings.ca.gov